Auxiliary products

Home » Auxiliary products » LUISO W25 for nitriding & nitrocarburizing

LUISO W25 for nitriding & nitrocarburizing

88,00  Without TAX

Price per Kg (excluding taxes): 88,00 €

For nitriding & nitrocarburizing

  • Without solvents
  • Environment friendly and fragrance-free
  • Viscosity and course may be adjusted by water
  • Drying time appr. 30 minutes only
  • Very good protection properties
  • Residues may be removed by water
SKU: W25 Category:

APPLICATION:

LUISO W25 is a fragrance-free and solvent-free stop off paint for nitriding and nitrocarburizing. The stop off paint is delivered ready for painting.
Before using, LUISO W25 should be stired up shortly and then applied with a paint brush. The work pieces to be treated must be free of grease and dirt! One layer is sufficient. To avoid evaporation the cans should be sealed hermetically after use. To restore normal viscositiy the stop off paint can be diluted by adding up to 2 % water. No special thinners are necessary.

The dry off time for LUISO W25 is 30 minutes. After heat treatment the LUISO W25 residues may be removed by using water. The paint is environment-friendly and therefore no special precautions are required.

PACKING:

LUISO W25 is delivered in PP-cans of 1 kg.

STORAGE:

LUISO W25 is sensitive to frost. Storage at room temperature is recommended. Opened cans should be sealed hermetically after use. Storage time should not exceed 12 months.

DATI:

Consistency: Painting
Thinning: Up to 2% water
Working temperature: Room temperature
Drying time: 30 minutes only
Surface: At least 0,3 – 0,5 mm
Packing: PP-cans
Packing unit: 1 Kg.
Precaution: None
Storage: Up to one year

Weight1,25 kg
Dimensions16 × 16 × 21 cm

Reviews

There are no reviews yet.

Be the first to review “LUISO W25 for nitriding & nitrocarburizing”

LET’S GET TO KNOW EACH OTHER BETTER

icona indirizzo

Address

Via Archimede, 327 21047 Saronno (Va) IT

ARE YOU LOOKING FOR INFORMATION?
FILL IN THE FORM!




    Shopping Cart